High Performance, Entry-Level Receipt Printer

TSP650
*Warning buzzer
*Power supply PS60
*Splash proof cover
*Display stand for vertical use and space saving. Can be used with or without attached in-store A5 graphics
*Operating CD with a suite of drivers
*Wall mount plate with vertical kit including both horizontal and vertical mount paper near end sensors
*Paper guide for choice of 58mm or 80mm paper widths
*Power switch cover to prevent accidental switch off
*Start up paper roll

Please click here for Catalog Download Service.
| Printer Method | Direct Thermal Line Printing | |
|---|---|---|
| Print Speed | up to 150mm/second | |
| Receipt Per Minute throughput speed | 19 receipts per minute (parallel interface) |
|
| Print Resolution | 203 dpi | |
| Two Colour Print Capability | Red, Blue and Black (special paper required) | |
| No. of Columns | 48 / 64 | |
| Character Set | ANK 95, 32 Int 128 Graphic | |
| International Code Pages | Star Mode = 40. ESC/POSTM = 6 & 1 Blank allowing an additional character page to be added | |
| Barcodes | 9 versions / PDF417 option | |
| Line Spacing | 3mm or 4mm + Programmable | |
| Paper Feed Speed | up to 150mm / sec. | |
| Paper Specifications: | Width | 80mm standard / 58mm (paper guide) |
| Weight | 0.065 ~ 0.085mm / 63 ~ 85gsm | |
| Roll Diameter | 83mm | |
| Easy-Load | "Drop-In & Print" | |
| Paper End | Standard | |
| Near End Sensor | Horizontal and vertical use | |
| Maximum Print Width | 80mm paper = 72mm, 58mm paper = 52mm | |
| Autocutter (guillotine) | Partial cut (centre cut) | |
| Logo Store | 2 Mbit Flash ROM with graphic management software | |
| Flash ROM | 16Mbits | |
| Interface versions | Serial,Parallel,USB,Ethernet | |
| Emulation | Star Line Mode & ESC/POSTM | |
| Peripheral Drive Circuit | 2 circuits (24V max. 1A), 1 Compulsion input | |
| Power Consumption | Operating / Waiting - Average 1.8 / 0.15A Uses PS60A - 24 Psu with Hosiden connector |
|
| Operating Conditions: | Temperature | 5°C to 45°C |
| Humidity | 10% ~ 90% RH (without condensation) | |
| Storage Conditions: | Temperature | -20 to 60°C |
| Humidity | 10% ~ 90% RH | |
| Dimensions | 142 (w) x 203.5 (d) x 132 (h) mm | |
| Weight | 1.72 / 1.56 Kg (Autocutter / Tear bar version) | |
| Safety Standards | UL, C-UL, TÜV, FCC, VCCI, EN55022, CE, Gost | |
| Reliability | Printer | 60 million lines (MCBF) |
| Autocutter | 1 million cuts | |
| Options | Parallel, Serial,USB,Ethernet Interfaces Wall & Vertical Mount Kits (basic wall mount kit supplied with printer) Splash Proof Cover Charcoal grey display stand with in-store A5 graphics facility, Buzzer |
|