Connect LAN Cable

Connect the LAN cable.
Please prepare a LAN cable that is compatible with category 5 or higher.

Before and after connecting the cable to the rear panel, remove and mount the rear cover respectively.
Remove/Mount Rear Cover

1. Connect the LAN cable to the network

  • Connect one side of the LAN cable to the hub/router.

2. Connect the LAN cable to the printer

  • Connect the other side of the LAN cable to the LAN connector of the printer.

3. Connect LAN cable

  • Cable outlets are provided in 3 locations (right, left, and back), and cables can be connected to suit the location where the device is placed.

Note

  • Make sure the LAN cable is correctly connected through the cable outlets so that the device does not tilt when it is set up.
    • Return to link source
     Top