Turn power on

Confirm that the power cable is connected properly before turning on the power.

Connect Power Cable

1. Turn power on

  • Press the power switch on the side of the main unit.

2. Confirm LED lamp

  • When the power is turned on and it can be used normally, the Ready LED turns on blue.
* If using a dedicated app and the Bluetooth diagnostic mode is set to ON, the color of the ReadyLED will be different.
ReadyLED color when Bluetooth diagnostic mode is ON
 Top

Turn power off

1. Turn power off

  • Press the power switch on the side of the main unit.

2. Confirm LED lamp

  • The Ready LED (blue) turns off when the power is turned off.
  • Confirm that the LED lamp has turned off before turning on the power again.
* If using a dedicated app and the Bluetooth diagnostic mode is set to ON, the color of the ReadyLED will be different.
ReadyLED color when Bluetooth diagnostic mode is ON
 Top